note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: tvs001d doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number / ordering information 1 / sta3k __ __ __ __ screening 2 / __ = not screened tx = tx level txv = txv level package je = to-257je v oltage 13.6 ? 800 volts v oltage tolerance 3 / a = 10% b = 5% sta3ka13.6je thru sta3ka800je 3,000 watt peak pulse power unidirectional transient voltage suppressor 13.6 ? 800 volts features: ? 13.6 ? 800 volts unidirectional in to-257 package ? glass passivated junction, epoxy encapsulated assembly ? meets all environmental requirements of mil-prf-19500 ? custom configuration available ? reverse polarity available (add suffix ?r?) ? 150c maximum operating temperature ? tx and txv level screening available applications: ? voltage sensitive components protection ? protection against power interruption ? lightning protection maximum ratings symbol value units stand off voltage v rwm 13.6 - 800 volts steady state power dissipation p d 10 watts peak pulse power @ 1.0 msec p pp 3000 watts peak surge current (8.3 ms pulse, half sine wave) i fsm 200 amps operating and storage temperature t op & t stg -65 to +150 c notes: 1 / for ordering information, price, and availability ? contact factory. 2 / screening based on mil-prf-19500. sc reening flows available on request. 3 / ssdi?s transient voltage suppressors offer standard breakdown voltage tolerances of 10% (a) and 5% (b). for other voltages and voltage tolera nces, contact ssdi?s marketing department. to-257je
note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: tvs001d doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com sta3ka13.6je thru sta3ka800je electrical characteristics part number 3 / breakdown 4 / max reverse stand off peak pulse clamping maximum temperature coefficient nominal voltage test current voltage reverse leakage current @ current tp = 1ms 5 / voltage (max) v br i brt v rwm i r @v rwm i pp v c tc @ 25c & 125c 10% 5% volts ma 10% 5% a a volts %/c sta3ka13.6je sta3kb13.6je 13.6 10 11.00 10.60 1000 143 21.0 0.057 sta3ka15je sta3kb15je 15 10 12.10 12.80 500 132 22.6 0.061 sta3ka16.4je sta3kb16.4je 16.4 10 13.26 14.04 200 124 24.2 0.065 sta3ka18.2je sta3kb18.2je 18.2 1.0 14.74 15.56 50 112 26.8 0.068 sta3ka20je sta3kb20je 20 1.0 16.2 17.1 10 103 29.0 0.073 sta3ka22je sta3kb22je 22 1.0 17.84 18.8 5.0 96.0 31.2 0.075 sta3ka24je sta3kb24je 24 1.0 19.44 20.4 5.0 90.0 33.4 0.076 sta3ka26je sta3kb26je 26 1.0 21.0 22.2 5.0 82.0 36.4 0.081 sta3ka30je sta3kb30je 30 1.0 24.2 25.6 5.0 71.0 42.4 0.084 sta3ka32je sta3kb32je 32 1.0 25.8 27.2 5.0 67.0 45.0 0.086 sta3ka36je sta3kb36je 36 1.0 29.0 30.6 5.0 57.2 52.4 0.088 sta3ka40je sta3kb40je 40 1.0 32.4 34.2 5.0 54.0 55.4 0.090 sta3ka44je sta3kb44je 44 1.0 35.6 37.6 5.0 49.0 61.2 0.092 sta3ka48je sta3kb48je 48 1.0 38.8 41.0 5.0 45.0 66.4 0.094 sta3ka60je sta3kb60je 60 1.0 48.6 50.2 5.0 36.0 82.8 0.097 sta3ka72je sta3kb72je 72 1.0 59.2 61.6 5.0 30.0 98.8 0.099 sta3ka86je sta3kb86je 86 1.0 69.2 73.6 5.0 25.3 118.6 0.101 sta3ka102je sta3kb102je 102 1.0 82.6 87.2 5.0 21.4 140.2 0.102 sta3ka124je sta3kb124je 124 1.0 100.4 106.0 5.0 17.7 170.0 0.104 sta3ka150je sta3kb150je 150 1.0 120.4 128.2 5.0 14.6 206.0 0.105 sta3ka164je sta3kb164je 164 1.0 132.8 140.2 5.0 13.3 226 0.105 sta3ka200je sta3kb200je 200 1.0 162 171 5.0 11.0 274 0.106 sta3ka300je sta3kb300je 300 1.0 242 256 5.0 7.2 414 0.108 sta3ka360je sta3kb360je 360 1.0 292 308 5.0 6.1 492 0.108 sta3ka400je sta3kb400je 400 1.0 324 342 5.0 5.5 548 0.108 sta3ka600je sta3kb600je 600 1.0 486 512 5.0 3.6 828 0.110 sta3ka800je stakb800je 800 1.0 648 684 5.0 2.7 1096 0.110 case outline: to-257je notes: 3 / ssdi?s transient voltage suppressors offer standard breakdown voltage tolerances of 10% (a) and 5% (b). for other voltages and voltage tolerances, contact ssdi?s marketing department. 4 / all voltages are measured with automat ed test set using 35 msec test time. longer or shorter test times will have a corresponding effect on the measured value due to the heating effects. 5 / pulse width (t p ) is defined as the time from peak pulse current i pp to the point where peak pulse current decayed to 50% of rated i pp (10sec x 100sec wave form as defined by r.e.a.).
|
